Català
Español
English
The classification of hazardous locations for gases and vapors is done using the Standard EN 60079-10, but this standard is based on the assumption that a number of data are known (rate and degree of escape, degree of ventilation, efficiency of ventilation , etc.) which often offer many doubts.
The document Report UNE 20207 IN-Guide of application of the Standard EN 60079-10 collects a good number of experimental formulas, quantitative values and criteria of good practices to help to specify the results of the classification in zones.
That is why this course has been organized with the aim that the student, at the end of the course, be able to:
- Identify the existence of an explosive atmosphere.
- Classify the area and quantify it (volume of the atmosphere, geometry, duration, etc.).
- Decide correctly on the possible application of atmospheric explosive control systems.
AIMED AT: users who may have an ATEX on their premises or premises, facility designers who may be in or generate an ATEX, maintenance managers, occupational risk prevention managers, prevention service managers, manufacturers of machinery with risk of fire or explosion, manufacturer of machinery that does not present a risk of fire or explosion but is intended to operate in areas classified ATEX, manufacturers of any product intended for areas classified as ATEX or that can create them, engineers, engineering and consulting of all the above.
DATES AND SCHEDULE: May 7 and 8, 2008, from 5 to 9 p.m.
COURSE SCHEDULE (8 hours):
- Determination of locations.
- Control of atmospheric explosiveness: quantitative criteria.
- Practical cases: approach and resolution of several practical cases.
-Conference.
NOTE: Case studies will be solved with the help of software that is delivered on CD. It is advisable (not essential) to bring a laptop in order to use the software at the same time as the speaker.
DOCUMENTATION: course follow-up documentation and a CD with the software to carry out the case study will be delivered.
PROFESSOR: Alfons de Victòria i Pou, Head of Industrial Product Safety at the General Sub-Directorate of Industrial Safety, of the Generalitat de Catalunya. Member of two AENOR technical standardization committees.
CERTIFICATION: A certificate of attendance at the course will be issued. Compulsory minimum attendance of 80% of school hours.
PLACE: Avinguda de Roma, 7 de Tarragona.
ASSOCIATED / NON-ASSOCIATED PRICE: € 70/100
MINIMUM / MAXIMUM NUMBER OF ATTENDANTS: 20/30
*** NOTE ***: Before making the payment it is necessary to check if there are any places left. The registration will not be considered firm if the payment is not made before the deadline.
FORM OF PAYMENT: Bank transfer or cash deposit to the account number 2073.0074.34.0110965962 of the Caixa de Tarragona, (it is necessary to indicate in the document justifying payment the name of the person attending and the name of the activity).
CONFIRMATION OF ATTENDANCE: to the administration of the College on tel. 977 251 877 or 902 076 777 or via email formacio@cetit.org.
REGISTRATION DEADLINE: April 28, 2008 or until the maximum number of attendees is completed.
The document Report UNE 20207 IN-Guide of application of the Standard EN 60079-10 collects a good number of experimental formulas, quantitative values and criteria of good practices to help to specify the results of the classification in zones.
That is why this course has been organized with the aim that the student, at the end of the course, be able to:
- Identify the existence of an explosive atmosphere.
- Classify the area and quantify it (volume of the atmosphere, geometry, duration, etc.).
- Decide correctly on the possible application of atmospheric explosive control systems.
AIMED AT: users who may have an ATEX on their premises or premises, facility designers who may be in or generate an ATEX, maintenance managers, occupational risk prevention managers, prevention service managers, manufacturers of machinery with risk of fire or explosion, manufacturer of machinery that does not present a risk of fire or explosion but is intended to operate in areas classified ATEX, manufacturers of any product intended for areas classified as ATEX or that can create them, engineers, engineering and consulting of all the above.
DATES AND SCHEDULE: May 7 and 8, 2008, from 5 to 9 p.m.
COURSE SCHEDULE (8 hours):
- Determination of locations.
- Control of atmospheric explosiveness: quantitative criteria.
- Practical cases: approach and resolution of several practical cases.
-Conference.
NOTE: Case studies will be solved with the help of software that is delivered on CD. It is advisable (not essential) to bring a laptop in order to use the software at the same time as the speaker.
DOCUMENTATION: course follow-up documentation and a CD with the software to carry out the case study will be delivered.
PROFESSOR: Alfons de Victòria i Pou, Head of Industrial Product Safety at the General Sub-Directorate of Industrial Safety, of the Generalitat de Catalunya. Member of two AENOR technical standardization committees.
CERTIFICATION: A certificate of attendance at the course will be issued. Compulsory minimum attendance of 80% of school hours.
PLACE: Avinguda de Roma, 7 de Tarragona.
ASSOCIATED / NON-ASSOCIATED PRICE: € 70/100
MINIMUM / MAXIMUM NUMBER OF ATTENDANTS: 20/30
*** NOTE ***: Before making the payment it is necessary to check if there are any places left. The registration will not be considered firm if the payment is not made before the deadline.
FORM OF PAYMENT: Bank transfer or cash deposit to the account number 2073.0074.34.0110965962 of the Caixa de Tarragona, (it is necessary to indicate in the document justifying payment the name of the person attending and the name of the activity).
CONFIRMATION OF ATTENDANCE: to the administration of the College on tel. 977 251 877 or 902 076 777 or via email formacio@cetit.org.
REGISTRATION DEADLINE: April 28, 2008 or until the maximum number of attendees is completed.
| Conditions: |