Català
Español
English
CIRCULAR CODE: 67/10
ORGANIZES: CETIT
After the electric motor, the pump is the machine with which the technician will work more frequently, for that reason the interest to know its characteristics.
Few technicians will design or build a bomb, but everyone will have to know how to use it, as well as isolated equipment, as well as the elements that surround it (pumping stations and conduits).
OBJECTIVE OF THE COURSE: With this course of APPLIED HYDRAULICS the student will learn to:
? Design pumping stations, calculate load losses in conduits and accessories and specify pumps.
? Assemble and carry out the commissioning of pumping stations with criteria of durability and reliability.
? Obtain the necessary knowledge for the reception of pumps and correct defects that design pumping.
DIRECTED to: technicians engaged in the project engineering, assembly and commissioning of the installations and those that make the maintenance and operation of pumping stations.
PROGRAM:
Modality: theoretical-practical face-to-face
Duration: 21 hours
1. FLUID MECHANICS
International System (SI) of units
Prefixes of the International System of Units
Greek alphabet
Fluids
Specific or absolute density
Specific volume
Specific weight
Relative density
Dynamic viscosity
Kinematic viscosity
Surface tension
Steam voltage
Problems (1)
2. PRESSURE
Relative pressure
Atmospheric pressure
Absolute pressure
Vacuum pressure
Steam pressure
Properties of the pressure
Problems (2)
3. HYDROSTATICS
Fundamental equation of the didrostatics
Conclusions
Static conduits
Problems (3)
4. HYDRODIATIC
Field of speeds
Stationary regime
Transitional regime
Flow rate
Equation of continuity
Uniform current
Laminar flow
Turbulent flow
Bernoulli equation
Green Bernoulli equation for a liquid
Green Bernoulli equation for a gas
Conclusions
Problems (4)
Real fluid
Name of reynolds
Conclusions
5. LOSS OF LOAN
Primary (or surface)
Secondary (or form)
Calculation of primary loss of charge
Calculation of secondary load losses
Calculation of the loss of the total load
Optimization of the diameter of the pipe
Conclusions
Problems (5)
Cavitation
Cop deiete?
Problems (6)
Conclusions
6. CONDUCTIONS
Electrical analogy
Conductions (theoretical)
Pipes (practical)
7. PUMPS. HYDRAULIC MACHINE
Types of pumps
Total manometric pumping height
Coupling of pumps
Laws of similarity
Powers
Loss of the pumps
Losses in the motors
Absolute clean suction height (NSPH)
Conclusions
Selection of pumps
Bomb reception tests
8. PUMP STATION
General considerations
Initial design
Technical specifications
Mounting the installation and start-up
Generalities
9. CONTROL IN THE PUMPS STATIONS
Variation of pump revolutions
Regulating valves in the drive
Recirculation of the flow through BYPASS in the drive
Variations in the diameter of the "rodete"
Pumps in parallel
TEACHER: Josep A. Viudez i Carricondo, Industrial Technical Engineer. Project engineer, construction manager, commissioning officer, maintenance manager and head of operation (maintenance, distribution and production) of water distribution company, in the province of Tarragona.
CALENDAR: November 16, 17, 19, 22, 24, 26 and 29, from 6:30 p.m. to 9:30 p.m.
COLLEGED / NOT COLLEGED PRICE: 160/210?
*** SUFFICIENT TRAINING THROUGH THE TRIPARTITE FOUNDATION, ACCORDING TO THE CREDIT OF YOUR COMPANY UP TO 294? (if not exceeding the amount of the course) ***
TRAINING SUBSIDIZED for workers in the general scheme (excluding freelancers and TET) New free service for the management of the annual credit of companies for the training of their employees.
CONTACT US AND WILL INFORM YOU, THE MANAGEMENT IS FREE!
DOCUMENTATION: tracking documentation will be delivered.
PLACE: Avenida de Roma, 7 from Tarragona.
MINIMUM / MAXIMUM ASSISTANT NAME: 15/25
CERTIFICATION: CETIT will issue a certificate of attendance to the course upon request of the participant. Minimum attendance of 80% of the teaching hours.
The certificates issued by the Tripartite Foundation for Employment Training will be issued automatically without prior request. Minimum attendance of 80% of the teaching hours.
PAYMENT METHOD: Bank transfer or cash deposit to the account number 2073.0074.34.0110965962 of the Caixa de Tarragona (it is necessary to indicate to the justification document of payment the name of the assistant and the name of the activity).
In cash or collection through your account number, which you must provide when making the registration.
CONFIRMATION OF ASSISTANCE: to the administration of the Col.legi at 977 251 877 or 902 076 777 or by email formacio@cetit.org.
REGISTRATION AND PAYMENT TERM: November 9, 2010 or until it is completed in maximum number of registrations if it is before the deadline.
ORGANIZES: CETIT
After the electric motor, the pump is the machine with which the technician will work more frequently, for that reason the interest to know its characteristics.
Few technicians will design or build a bomb, but everyone will have to know how to use it, as well as isolated equipment, as well as the elements that surround it (pumping stations and conduits).
OBJECTIVE OF THE COURSE: With this course of APPLIED HYDRAULICS the student will learn to:
? Design pumping stations, calculate load losses in conduits and accessories and specify pumps.
? Assemble and carry out the commissioning of pumping stations with criteria of durability and reliability.
? Obtain the necessary knowledge for the reception of pumps and correct defects that design pumping.
DIRECTED to: technicians engaged in the project engineering, assembly and commissioning of the installations and those that make the maintenance and operation of pumping stations.
PROGRAM:
Modality: theoretical-practical face-to-face
Duration: 21 hours
1. FLUID MECHANICS
International System (SI) of units
Prefixes of the International System of Units
Greek alphabet
Fluids
Specific or absolute density
Specific volume
Specific weight
Relative density
Dynamic viscosity
Kinematic viscosity
Surface tension
Steam voltage
Problems (1)
2. PRESSURE
Relative pressure
Atmospheric pressure
Absolute pressure
Vacuum pressure
Steam pressure
Properties of the pressure
Problems (2)
3. HYDROSTATICS
Fundamental equation of the didrostatics
Conclusions
Static conduits
Problems (3)
4. HYDRODIATIC
Field of speeds
Stationary regime
Transitional regime
Flow rate
Equation of continuity
Uniform current
Laminar flow
Turbulent flow
Bernoulli equation
Green Bernoulli equation for a liquid
Green Bernoulli equation for a gas
Conclusions
Problems (4)
Real fluid
Name of reynolds
Conclusions
5. LOSS OF LOAN
Primary (or surface)
Secondary (or form)
Calculation of primary loss of charge
Calculation of secondary load losses
Calculation of the loss of the total load
Optimization of the diameter of the pipe
Conclusions
Problems (5)
Cavitation
Cop deiete?
Problems (6)
Conclusions
6. CONDUCTIONS
Electrical analogy
Conductions (theoretical)
Pipes (practical)
7. PUMPS. HYDRAULIC MACHINE
Types of pumps
Total manometric pumping height
Coupling of pumps
Laws of similarity
Powers
Loss of the pumps
Losses in the motors
Absolute clean suction height (NSPH)
Conclusions
Selection of pumps
Bomb reception tests
8. PUMP STATION
General considerations
Initial design
Technical specifications
Mounting the installation and start-up
Generalities
9. CONTROL IN THE PUMPS STATIONS
Variation of pump revolutions
Regulating valves in the drive
Recirculation of the flow through BYPASS in the drive
Variations in the diameter of the "rodete"
Pumps in parallel
TEACHER: Josep A. Viudez i Carricondo, Industrial Technical Engineer. Project engineer, construction manager, commissioning officer, maintenance manager and head of operation (maintenance, distribution and production) of water distribution company, in the province of Tarragona.
CALENDAR: November 16, 17, 19, 22, 24, 26 and 29, from 6:30 p.m. to 9:30 p.m.
COLLEGED / NOT COLLEGED PRICE: 160/210?
*** SUFFICIENT TRAINING THROUGH THE TRIPARTITE FOUNDATION, ACCORDING TO THE CREDIT OF YOUR COMPANY UP TO 294? (if not exceeding the amount of the course) ***
TRAINING SUBSIDIZED for workers in the general scheme (excluding freelancers and TET) New free service for the management of the annual credit of companies for the training of their employees.
CONTACT US AND WILL INFORM YOU, THE MANAGEMENT IS FREE!
DOCUMENTATION: tracking documentation will be delivered.
PLACE: Avenida de Roma, 7 from Tarragona.
MINIMUM / MAXIMUM ASSISTANT NAME: 15/25
CERTIFICATION: CETIT will issue a certificate of attendance to the course upon request of the participant. Minimum attendance of 80% of the teaching hours.
The certificates issued by the Tripartite Foundation for Employment Training will be issued automatically without prior request. Minimum attendance of 80% of the teaching hours.
PAYMENT METHOD: Bank transfer or cash deposit to the account number 2073.0074.34.0110965962 of the Caixa de Tarragona (it is necessary to indicate to the justification document of payment the name of the assistant and the name of the activity).
In cash or collection through your account number, which you must provide when making the registration.
CONFIRMATION OF ASSISTANCE: to the administration of the Col.legi at 977 251 877 or 902 076 777 or by email formacio@cetit.org.
REGISTRATION AND PAYMENT TERM: November 9, 2010 or until it is completed in maximum number of registrations if it is before the deadline.
| Conditions: |