Català
Español
English
CIRCULAR CODE: 10/09
A course on electrical installations of high voltage and transformation centers has been organized, adapted to the new Regulations on technical conditions and safety guarantees and power lines approved in RD 223/2008 of September 19, 2009 .
OBJECTIVE of the course: solve a type project with the DMELECT programs.
DATES AND TIMETABLE: 24, 25 and 26 (Tuesday, Wednesday and Thursday) from February 2009, from 5 to 9 pm.
COURSE PROGRAM:
Main changes of the new regulation. New Complementary Technical Instructions (ITC) and UNE Standards.
- Calculation of Electrical Installations in High Voltage Underground, according to ITC-LAT 06. PVC vinyl polychloride, Ethylene Propylene (EPR), High Modulus Ethylene-Propylene (HEPR) and XLPE Cross-linked Polyethylene (up to 36/66 kV). New tables of permissible intensities in directly buried cables, buried under the tube and in the air. New correction factors for installation and temperature.
- Electrical Calculation of Air Networks, according to ITC-LAT 07. Cu, Al and Al-Ac.
- Obtención de cargas en Polígonos Industriales, Residenciales, Planes de Actuación, etc.
- Surge protection elements according to new regulation. Self-valves-lightning rods.
- Protection elements for overcurrents according to new regulation. Automatic switches, Fuses, Switches, Switches-Switches, etc.
- Calculation of any type of Branch Network and / or Mallada. Short-circuit calculation in conductors and screens according to new regulation.
- Mechanical Calculation of High Voltage Air Power Lines, according to ITC-LAT 07. General equation of a cable between two points. Equation of change of conditions. Ideal range of regulation. New Surcharges in the cables. New conditions of Maximum Tensions and Arrows. Table of regulation of a cable. Distribution of the supports, Gravivano and Eolano. New conditions for Crossings and Parallels. Chains of insulators. Metal lattice supports according to UNE 207017, Metal plate supports (circular and rectangular) according to UNE 207018 and Concrete posts (HV and HVH) according to UNE 207016. Different support functions: Line end, Alignment (suspension or mooring), Anchorage , Angle (suspension or tethering) and Stapling (bypass). Different assemblies: 0 (plane), I (triangle), Three-pole, Vault, Flag and Double Circuit. Protection of the Avifauna.
- Transformation Centers. Prefabricated, of work and weather type (over support). Calculation of intensities in AT and BT, short circuits in AT and BT, mudguards, protections, ventilation and complete grounding (tension of passage and contact in the interior, exterior and access, permissible stresses, transferred voltages, earth resistance, separation service lands and protection, etc.). ITC-LAT 07.
DOCUMENTATION: technical documentation for the follow-up of the course will be presented (book of calculation of electrical installations in AT).
PROFESSORS: Angel Muñoz Medina, Industrial Engineer and Juan Martos López, Industrial Technical Engineer, of the company DMELECT, SL
CERTIFICATION: A certificate of attendance will be given to the course. Minimum attendance of 80% of the teaching hours.
PLACE: Avenida de Roma, 7 from Tarragona.
COLLEGED / NOT COLLECTIVE PRICE: € 160 / € 215
MINIMUM / MAXIMUM ASSISTANT NAME: 15/40
*** NOTE ***: Before making the payment, it is necessary to verify if there are places remaining.
The confirmation of assistance implies the obligation to pay before the deadline.
PAYMENT METHOD: Bank transfer or cash deposit to the account number 2073.0074.34.0110965962 of the Caixa de Tarragona, (the name of the assistant and the name of the activity must be indicated in the document justifying payment).
CONFIRMATION OF ASSISTANCE: to the administration of the School at 977 251 877 or 902 076 777 or by email formacio@cetit.org.
REGISTRATION AND PAYMENT TERM: February 23, 2009 or until the maximum number of attendees is completed if it is before the deadline.
EL CETIT HAS THE URBANIZATION AND BUILDING MODULES OF THE COMPUTER SOFTWARE DMELECT AND DMCAT 2008 TO THE SERVICE OF COLLECTIBLES
15% DISCOUNT TO ALL THE COURSE ASSISTANTS WHO WOULD LIKE TO PURCHASE ANY DMELECT PROGRAM
A course on electrical installations of high voltage and transformation centers has been organized, adapted to the new Regulations on technical conditions and safety guarantees and power lines approved in RD 223/2008 of September 19, 2009 .
OBJECTIVE of the course: solve a type project with the DMELECT programs.
DATES AND TIMETABLE: 24, 25 and 26 (Tuesday, Wednesday and Thursday) from February 2009, from 5 to 9 pm.
COURSE PROGRAM:
Main changes of the new regulation. New Complementary Technical Instructions (ITC) and UNE Standards.
- Calculation of Electrical Installations in High Voltage Underground, according to ITC-LAT 06. PVC vinyl polychloride, Ethylene Propylene (EPR), High Modulus Ethylene-Propylene (HEPR) and XLPE Cross-linked Polyethylene (up to 36/66 kV). New tables of permissible intensities in directly buried cables, buried under the tube and in the air. New correction factors for installation and temperature.
- Electrical Calculation of Air Networks, according to ITC-LAT 07. Cu, Al and Al-Ac.
- Obtención de cargas en Polígonos Industriales, Residenciales, Planes de Actuación, etc.
- Surge protection elements according to new regulation. Self-valves-lightning rods.
- Protection elements for overcurrents according to new regulation. Automatic switches, Fuses, Switches, Switches-Switches, etc.
- Calculation of any type of Branch Network and / or Mallada. Short-circuit calculation in conductors and screens according to new regulation.
- Mechanical Calculation of High Voltage Air Power Lines, according to ITC-LAT 07. General equation of a cable between two points. Equation of change of conditions. Ideal range of regulation. New Surcharges in the cables. New conditions of Maximum Tensions and Arrows. Table of regulation of a cable. Distribution of the supports, Gravivano and Eolano. New conditions for Crossings and Parallels. Chains of insulators. Metal lattice supports according to UNE 207017, Metal plate supports (circular and rectangular) according to UNE 207018 and Concrete posts (HV and HVH) according to UNE 207016. Different support functions: Line end, Alignment (suspension or mooring), Anchorage , Angle (suspension or tethering) and Stapling (bypass). Different assemblies: 0 (plane), I (triangle), Three-pole, Vault, Flag and Double Circuit. Protection of the Avifauna.
- Transformation Centers. Prefabricated, of work and weather type (over support). Calculation of intensities in AT and BT, short circuits in AT and BT, mudguards, protections, ventilation and complete grounding (tension of passage and contact in the interior, exterior and access, permissible stresses, transferred voltages, earth resistance, separation service lands and protection, etc.). ITC-LAT 07.
DOCUMENTATION: technical documentation for the follow-up of the course will be presented (book of calculation of electrical installations in AT).
PROFESSORS: Angel Muñoz Medina, Industrial Engineer and Juan Martos López, Industrial Technical Engineer, of the company DMELECT, SL
CERTIFICATION: A certificate of attendance will be given to the course. Minimum attendance of 80% of the teaching hours.
PLACE: Avenida de Roma, 7 from Tarragona.
COLLEGED / NOT COLLECTIVE PRICE: € 160 / € 215
MINIMUM / MAXIMUM ASSISTANT NAME: 15/40
*** NOTE ***: Before making the payment, it is necessary to verify if there are places remaining.
The confirmation of assistance implies the obligation to pay before the deadline.
PAYMENT METHOD: Bank transfer or cash deposit to the account number 2073.0074.34.0110965962 of the Caixa de Tarragona, (the name of the assistant and the name of the activity must be indicated in the document justifying payment).
CONFIRMATION OF ASSISTANCE: to the administration of the School at 977 251 877 or 902 076 777 or by email formacio@cetit.org.
REGISTRATION AND PAYMENT TERM: February 23, 2009 or until the maximum number of attendees is completed if it is before the deadline.
| Conditions: |